| Voir le sujet précédent :: Voir le sujet suivant   | 
 
| Auteur | 
Message | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 Posté le: 24/05/2010 17:39    Sujet du message: Minimoa 1:2.5 | 
       | 
 
  | 
 
 
  | 
 
Here we go again         ... This time even bigger and for sure more scale   ...
 
 
Current  condition... 
 
   
 
 
looking rather small at 2.8m fuselage   ...
 
   
 
 
 
Regards !
 
 
Uroš | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 Posté le: 11/06/2010 01:42    Sujet du message: Mninmoa ! | 
       | 
 
  | 
 
 
  | 
 
Some work was done on the elevator   ...
 
 
from the side...
 
   
 
 
1200mm    ...
 
   
 
 
Regards !
 
 
Uroš | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
VincentB Serial Posteur
  
  
  Inscrit le: 23 Jan 2006
  
  Localisation: Hérault
 Âge: 61
 
  | 
 Posté le: 11/06/2010 05:25    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
Hi Uroš, 
 
Very clean   what will be your choice for the color scheme? the same HB282 or another? | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Anonyme Serial Posteur
  
  
  Inscrit le: 26 Jan 2006
  
  
  | 
 Posté le: 11/06/2010 06:52    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
Nice work, the Minimoa is  always  welcome     such a mythic glider   
 
personal drawings or  enlarged plans ? A scale masterpiece this time !!   | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 Posté le: 11/06/2010 08:33    Sujet du message: Minimoa ! | 
       | 
 
  | 
 
 
  | 
 
	« VincentB » a écrit: 	Hi Uroš, 
 
Very clean  ![[good]](images/smiles/good.gif)  what will be your choice for the color scheme? the same HB282 or another?	  
 
 
As a tribute to 1:3.5 (RIP) it will be hb-282 design, but this time covered with oratex and painted...
 
 
 
Regards !
 
 
Uroš | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Anonyme Serial Posteur
  
  
  Inscrit le: 26 Jan 2006
  
  
  | 
 Posté le: 11/06/2010 09:41    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
and with the right canopy you'll have to mould ????    I have some nice pictures  of the internal settlement and many others if you need...  I made one HB 282 at 1:4 scale    | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
cw Accro Posteur
  
  
  Inscrit le: 06 Juil 2008
  
  Localisation: Blandford, Dorset, Southern England
 Âge: 77
 
  | 
 Posté le: 11/06/2010 18:51    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
RIP, Uroš...?
 
   cw | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 Posté le: 18/06/2010 14:32    Sujet du message: Minimoa ! | 
       | 
 
  | 
 
 
  | 
 
Some more work done on the rudder      ....
 
   
 
 
   
 
 
on the fuselage...
 
   
 
 
wondering if this all together is to BIG      ....
 
   
 
 
just the right size          ...
 
   
 
 
Regards !
 
 
Uroš | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Peter64 Maniaco Posteur
  
  
  Inscrit le: 17 Oct 2007
  
  Localisation: Kärnten
 Âge: 61
 
  | 
 Posté le: 18/06/2010 20:53    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
Hallo Uros,
 
nice rudder, good work      .
 
 
Greetings
 
Peter | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Anonyme Serial Posteur
  
  
  Inscrit le: 26 Jan 2006
  
  
  | 
 Posté le: 19/06/2010 14:26    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
Congratulations    | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Olivier Fidèle Posteur
  
  
  Inscrit le: 02 Aoû 2009
  
  Localisation: Lausanne
 Âge: 38
 
  | 
 Posté le: 19/06/2010 16:21    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
Huuuuuuuuuuuuuuuge !!    
 
What is the weight ?
 
   La Vie c'est un truc de DIINGUES !!    | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 Posté le: 19/07/2010 19:04    Sujet du message: Minimoa ! | 
       | 
 
  | 
 
 
  | 
 
Some more progress on inner wing section      ....
 
 
Ribs...
 
   
 
 
Template...
 
   
 
 
It's easy with fixed ribs...
 
   
 
 
And the result      ...
 
   
 
 
2.6m          ...
 
   
 
 
Still missing 2 meters on each side      ...
 
   
 
 
 
 
Regards !
 
 
Uroš | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Anonyme Serial Posteur
  
  
  Inscrit le: 26 Jan 2006
  
  
  | 
 Posté le: 19/07/2010 21:27    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
Nice work but why so many spars on the inner wing?   (according to the scale appearance?)  ![[humm]](images/smiles/humm.gif)  | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
DELRIEUPierre Psycho Posteur
  
  
  Inscrit le: 28 Jan 2006
  
  Localisation: Arvert 17530
 Âge: 75
 
  | 
 Posté le: 20/07/2010 02:17    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
Normal that you make as great  , with as beautiful vegetables in the garden    
 
good work 
 
Pierre | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 Posté le: 20/07/2010 07:56    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
	« Hecquetmarc » a écrit: 	Nice work but why so many spars on the inner wing?  ![[humm]](images/smiles/humm.gif)  (according to the scale appearance?)    	 
 
 
You are right, that's not entirely scale design   . But with wing root at 52cm I was a bit worried about mechanical aspect. As the front side will be planked only the two spars will be visible. Still one too much   , but I just wanted to be on the safe side    ...
 
 
 
	« DELRIEUPierre » a écrit: 	Normal that you make as great  , with as beautiful vegetables in the garden     
good work 
 
Pierre	  
 
 
That's one of my wife's contributions to this project   ... | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Anonyme Serial Posteur
  
  
  Inscrit le: 26 Jan 2006
  
  
  | 
 Posté le: 20/07/2010 08:20    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
I understand your fear , I  suppose you put a cap on the ribs so the spar will not appear directly after the wing is covered     nevertheless there is no problem if  you build a strong trailing edge.Do you install airbrakes on upper and bottom sides of the wing? | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 Posté le: 20/07/2010 13:47    Sujet du message: Minimoa ! | 
       | 
 
  | 
 
 
  | 
 
Not sure about the airbrakes yet   ... It would be much easier to make them just on the upper side. On the other side, two sided airbrakes, like the one I made on my Kranich, add that something to real front figure when you are aproaching for landing      ... | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Anonyme Serial Posteur
  
  
  Inscrit le: 26 Jan 2006
  
  
  | 
 Posté le: 20/07/2010 16:20    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
If you're not involved in a true  scale  sailplane, make the  simpliest way...   | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 Posté le: 02/11/2010 11:19    Sujet du message: Minimoa ! | 
       | 
 
  | 
 
 
  | 
 
Quite some progress was made in past few weeks   ... This is the current state of the project...
 
 
   
 
 
   
 
 
   
 
 
   
 
 
 
Regards !
 
Uroš | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Johannes Serial Posteur
  
  
  Inscrit le: 23 Juil 2007
  
  Localisation: Leichlingen
 Âge: 65
 
  | 
 Posté le: 02/11/2010 12:02    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
Hallo Uroš,
 
 
Sieht einfach toll aus, deine MiMo   
 
Schade das das Holzwerk wieder verdeckt wird   
 
 
Gruß Johannes | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 Posté le: 02/11/2010 12:34    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
	« Johannes » a écrit: 	Hallo Uroš,
 
Sieht einfach toll aus, deine MiMo    
Schade das das Holzwerk wieder verdeckt wird    
Gruß Johannes	  
 
 
Dieses mal nicht   ... Wird mit oratex natur gespannt   ...
 
 
 
Gruß
 
Uroš | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Orionis Incurable Posteur
  
  
  Inscrit le: 31 Aoû 2006
  
  Localisation: Drôme
 Âge: 59
 
  | 
 Posté le: 02/11/2010 13:35    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
Hi, Uros, nice building!
 
It's a good thing you've built its own shelter!   
 
   Fabrice | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Walter L. Maniaco Posteur
  
  
  Inscrit le: 06 Fév 2008
  
  Localisation: Neuenrade
  | 
 Posté le: 02/11/2010 21:51    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
Hello Uroš,
 
 
your glider is really great!
 
 
Which profile do you use?
 
 
Do you have an idea which weight the modell will have?
 
 
Best regards
 
 
Walter | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Anonyme Serial Posteur
  
  
  Inscrit le: 26 Jan 2006
  
  
  | 
 Posté le: 02/11/2010 22:42    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
Great job, no doubt I will also build  a big Minimoa one day  after the one I made a few years ago  at 1:3,5 scale, even if it's a great  classic often  built...Maybe the two seater... Which scheme did you choose  for  yours?
 
    ![[clap]](images/smiles/Clap.gif)  | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
Rusjan Apprenti Posteur
  
  
  Inscrit le: 11 Déc 2008
  
  
 Âge: 56
 
  | 
 Posté le: 03/11/2010 08:53    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
	« Walter L. » a écrit: 	Hello Uroš,
 
 
your glider is really great!
 
 
Which profile do you use?
 
 
Do you have an idea which weight the modell will have?
 
 
Best regards
 
 
Walter	  
 
 
I used HQ 3.5/14 on the middle section and HQ 3.5/12 on the outside. Regarding weight, it sould be under 20kg, I guess around 17kg.
 
 
 
	« Hecquetmarc » a écrit: 	Great job, no doubt I will also build  a big Minimoa one day  after the one I made a few years ago  at 1:3,5 scale, even if it's a great  classic often  built...Maybe the two seater... Which scheme did you choose  for  yours?
 
     	 
 
 
It will be HB-232 design. Covered with natur oratex and painted white.
 
 
 
Regards !
 
Uroš | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
jean claude Crétal Serial Posteur
  
  
  Inscrit le: 21 Avr 2008
  
  Localisation: Charente-Maritime
  | 
 Posté le: 03/11/2010 12:17    Sujet du message:  | 
       | 
 
  | 
 
 
  | 
 
Good job Uros    
 
I use the same profile on my new C 25, normaly it's efficient and not too speed  
 
   Jean-Claude
 
 
"Si il n'y avait pas le sol, l'Aviation ça serait pas dangereux!!!..."
 
Marcel Jeanjean (sous les cocardes 1919) | 
 
  | 
 
| Revenir en haut de page | 
 | 
 
  | 
 
 |